View Single Post
  #3  
Old 11-01-2005, 10:32 PM
Tabor
Guest
 
Posts: n/a
Update

So, I did another fluid and filter change and I swapped the pan from the old transmission onto the new(er) one. And, problem fixed! Actually, the problem was that there was much less room between the filler tube and the pan when i was using the pan from the new(er) transmission. So, I couldn't get the banjo bolt very tight before the filler tube came in contact with the pan.

Note: This is on a 1979 300SD and the new(er) transmission is off of a 1980 300SD. It is still the same transmission, but maybe there was a change to the pan and filler tube. There is definately a difference between the two pans I have.

EDITed for spelling.
Reply With Quote