View Single Post
Old 06-25-2001, 08:58 AM
Posts: n/a
Thanks Benzmac. Your initial diagnosis matches that of the local MB dealer and it makes sense..."Pump pressure problem". I went ahead and pulled the tranny Saturday while I had some help. There were some small, soft particles and a few droplets of water in the pan. I suspect that the clean up at the salvage yard was with a pressure washer and the converter off the input shaft. That would have left a direct path for water and anything else flying around. Hopefully I can talk to them before they do the clean up this time to make sure they keep it sealed. Thanks for your input.
Reply With Quote