View Single Post
  #2  
Old 11-02-2005, 01:43 PM
Brian Carlton Brian Carlton is offline
Banned
 
Join Date: May 2002
Location: Blue Point, NY
Posts: 25,396
Welcome to the forum.

Sometimes they get stuck pretty well on the plastic fittings.

You definitely don't want to pull on them.

If you can't twist them and break the bonds loose, you'll need to cut the hose off close to the fitting and then carefully work a small knife in there and slit the remaining section of the hose. Once it's slit along it's length, it will probably come right out for you.

BTW, that metal clip is necessary on that line because it is a pressurized line from the ALDA. Be somewhat careful when you put it back on.
Reply With Quote