View Single Post
Old 11-11-2005, 01:44 PM
myarmar myarmar is offline
Registered User
Join Date: Jan 2002
Location: NY
Posts: 500
Originally Posted by alienman

I've checked the resistance on the wires and they seem to be in spec (all around the same values, based on length of wires). But I will try swapping wires from the old set that I have to see if that is the problem.

I'm not familiar with M103, but in general Mercedes wires don't have any measurable resistance. They use copper wire. Resistor (1k ??) is in the plug end connector. If 103 is the same you should not see any different resistances between the wires.
Reply With Quote