View Single Post
  #2  
Old 07-04-2001, 05:26 PM
Benzmac Benzmac is offline
Registered User
 
Join Date: Mar 1999
Location: Suwanee, GA, USA
Posts: 4,712
Most of the time when the pump starts to fail, it will draw too much amperage and then kill the relay. You should check the amperage of the pump(s) and if the spec is too high, replace the pump(s) and relay.
__________________
Benzmac:
Donnie Drummonds
ASE CERTIFIED MASTER AUTO TECHNICIAN
MERCEDES SPECIALIST 11 YRS
Reply With Quote