Look at the picture and see where the nut is attached to the pully/bracket assembly. Notice the shape of the bracket is such that a open end wrench will fit over it. Install the assembly with the belt on the pullies. Then use an open end wrench to apply tension on the belt pully assembly. Use another box wrench to tighten the bolt holding the whole pully assembly to the block/mounting bracket.
The area shown in the picture
Dave
__________________
1970 220D, owned 1980-1990
1980 240D, owned 1990-1992
1982 300TD, owned 1992-1993
1986 300SDL, owned 1993-2004
1999 E300, owned 1999-2003
1982 300TD, 213,880mi, owned since Nov 18, 1991- Aug 4, 2010 SOLD
1988 560SL, 100,000mi, owned since 1995
1965 Mustang Fastback Mileage Unknown(My sons)
1983 240D, 176,000mi (My daughers) owned since 2004
2007 Honda Accord EX-L I4 auto, the new daily driver
1985 300D 264,000mi Son's new daily driver.(sold)
2008 Hyundai Tiberon. Daughters new car
|