View Single Post
Old 12-26-2005, 12:46 AM
Brian Carlton Brian Carlton is offline
Join Date: May 2002
Location: Blue Point, NY
Posts: 25,396
Originally Posted by pawoSD
I am SUPER paranoid now, mine makes noises sometimes, I am buying a fuse holder and 1A fuse on Monday night!!! and wiring it right in!!! Especially since mine is acting flaky on occassion.
Getting to the wiring on the SD is a little tricky. I advise that you remove the battery. Just to the inside of the battery (toward the driver) there will be a plug. This is the plug for the pump. It unsnaps from a holder. Determine which is the 12V lead and put the fuse on the pump side of the plug.

You can't see the pump, or find the wiring to the pump on the SD without taking out half the plumbing between the two firewalls. Naturally, this would require you to remove the middle section of the forward firewall.
Reply With Quote