View Single Post
  #2  
Old 07-19-2001, 09:19 PM
engatwork's Avatar
engatwork engatwork is offline
busy
 
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 11,773
anders - Sounds like a leak has come up over the past couple/few weeks - especially if you are getting bubbles in the site glass. This is an indication of not enough refrigerant which can prevent the fan from coming on and if the system is working properly should keep the compressor clutch from engaging. Take it back to whoever you had do the conversion and get them to hook the gauges back up to determine the pressures. Also, if they put dye into the system, they should have a black light and will be able to readily spot the leak.
__________________
Jim
Reply With Quote