That is structural damage, it must be welded.
Quote:
Originally Posted by deerefanatic
The side pocket on the drivers side has a large 4-6 inch hole right above the exhaust pipe, and another large one under and behind the power antenna motor. On the passenger's side, the weld seams are already rusted out.
I am planning to cut out all the side well pockets and get it clear back to clean metal. Then reconstruct the side wells with long-strand fiberglass.
|
The area you refer to is part of the quarter panel support and impact crumple zone = safety structure = it is structural damage, and must be welded.
Rust stoppers.
Rust stoppers.
Welding the wrong metals can kill you
http://www.peachparts.com/shopforum/bodywork-repair-paint-tools-tips-tricks/139957-welding-wrong-metals-can-kill-you.html#post1041594
__________________
ASE Master Mechanic
asemastermechanic@juno.com
Prototype R&D/testing:
Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician.
Noise Vibration and Harshness (NVH).
Dynamometer.
Heat exchanger durability.
HV-A/C Climate Control.
Vehicle build.
Fleet Durability
Technical Quality Auditor.
Automotive Technical Writer
1985 300SD
1983 300D
1984 190D
2003 Volvo V70
2002 Honda Civic
https://www.boldegoist.com/
|