I have bypassed the relay (by bridging jacks 7 & 8 in the relay socket), the pump worked, also delivery rate is checked at this time. I also have a new relay which I have tried as well, but result is the same. Pump is heard when cranking engine and for a short while after cranking.
Also after a few attempts, the spark plug tend to be wet with fuel, (is this normal?)
One other thing, there is spark from coil to distributor, but no spark at the cylinders (tested with HT leads and earthed spark plug) I don't know how old the leads are, but all have around 1.1k ohms, and connectors looks fine. The distributor and rotor are fairly new as well, are clean with no cracks. Is there anything I may have overlooked?