Quote:
|
Originally Posted by Brian Carlton
Of course. Just drain the radiator, remove the block drain, and, if you can get a Prestone T, you can install it in the line from the head and flush the heater core with a garden hose. Or, you can just shove the garden hose into the end of the hose and flush the heater core. Makes a big mess, but it works.
Then, when all the water is clean.........just let it all drain out and close it all up.
Refill with a 50/50 mix of Zerex G-05 and distilled water. Don't forget to take off the upper hose and fill it as much as you possibly can.
|
Sounds cool. You say " shove the garden hose into the the end of the hose and flush..." Into which hose? The upper hose from the radiator???
If I flush the heater core do I need to plug the radiator back up so there are not 2 openings?????