View Single Post
  #1  
Old 01-13-2006, 07:15 PM
atikovi atikovi is offline
Registered User
 
Join Date: Sep 2003
Location: Suburban Washington DC
Posts: 892
’95 S280 won’t start, injectors not firing.

The last time I used the car about a month ago it started fine but now it won’t start at all. I sprayed starting fluid in the air intake and it ran for a few seconds so I figure the ignition system is fine plus I also pulled and cleaned all the plugs. I hooked up a fuel pressure gauge to the fuel rail and it shows strong pressure so the fuel pump is good. Lastly I plugged a noid light into one of the injector connectors and cranked the engine and it didn’t flash indicating the injectors aren’t getting a signal to open. Where should I go next? Is there a fuse that controls the injectors that may have blown and if so where is the fuse box?
Reply With Quote