View Single Post
  #4  
Old 08-03-2001, 08:55 PM
doktortim
Guest
 
Posts: n/a
190 SL Clutch

Finished the job today. Pulled the tranny. The driveline pushed back just fine after removing the zirk for the spline so the lube could push out. I considered pulling the motor because there are far few hookups on these early cars.

What I was looking for was an indication from someone who knows as to which is the factory procedure. I feel sure it is pulling the tranny now that I've done it.

Thanks for the ideas.

Regards,
Reply With Quote