View Single Post
Old 02-22-2006, 07:41 PM
hookedon210s hookedon210s is offline
Registered User
Join Date: Jan 2004
Location: Jacksonville, FL
Posts: 474
It's very tight, too. I used the Lisle tool to remove the bolts on the rear hatch of my (former) 83 300tdt and bent the tool. Be sure to insert the tool all the way, hammer on the end of the tool a bit while it is installed in the bolt, attach your ratchet (and socket) and then snap the wrench hard to pop it loose. Mark
Reply With Quote