View Single Post
  #9  
Old 03-10-2006, 08:39 AM
R Leo's Avatar
R Leo R Leo is offline
Stella!
 
Join Date: Mar 2003
Location: En te l'eau Rant
Posts: 5,393
Remove a-pillar covers.

At the a-pillar, and use a plastic wedge to gently push the door welting outwards from the pillar. This exposes the outer edge of the a-pillar cover. Start about 2" above the bottom of the cover and use the wedge to pry the cover loose from the a-pillar. The cover is held in place by two metal clips: one is about 2" from the bottom, the other about 2" from the top.

To remove the cover, move the bottom of the cover towards the center of the car and downwards.

Make sure to put the welting back in place before you close the door.
Attached Thumbnails
W-126 Dash Removal - Evaporator Replacement-apillarremove.jpg   W-126 Dash Removal - Evaporator Replacement-apillar.jpg  
__________________
Never a dull moment at Berry Hill Farm.

Last edited by R Leo; 03-10-2006 at 02:15 PM.
Reply With Quote