Quote:
Originally Posted by janko
gentlemen. thank you. status in reverse order.
fluid and filter replaced in last 10k miles. pan looked fine.
changed out #14 fuze.
still no unshift.
modulator suggestion. sorry i'm kinda dumb. where is the modulator?
again thank you all.
|
left side of trans with a vacuum hose attached. Turning modulator adjustment clockwise may be in order. However, you COULD still drop the pan and change the filter, cutting it open to look for debris. After 10K it should be pretty clean. If it's not, try adding a quart of trans-x. Often it will loosen varnish on the clutch plates that causes slipping or loosen a stuck spool in the valve body. But if the frictions or drum seals are shot, you'll need to do some disassembly.