View Single Post
Old 08-25-2001, 08:49 AM
Posts: n/a
I think Benzmac is referring to the tools that are required to do the valve job. As far as removing the intake system, it should not be very difficult. If you have a digital camera, take lots of pictures and use different color tie wraps on the vacuum and electrical hookups as you disassemble. I just did a removal of engine and transmission and did a valve job (farmed out) and put it all back in a couple of months ago in my 380. It is simple. I only had to buy a few standard MM tools.
Attached Thumbnails
having heads rebuilt-englift.jpg  
Reply With Quote