Quote:
Originally Posted by rhodes2010
Shop manual says to replace the one-time-use bolts that hold rotor
to hub.
Bolts are a dealer item ?
Do you all replace the bearings at the same time ?
|
If you tighten he existing cap screws to spec and use a bit of Loctite, I don't see any reason to purchase new cap screws when you change the rotors. They surely can be had from places other than the dealer, but, not typically in quantities of 12. But, you might get lucky at a well stocked hardware store.
10mm seems to ring a bell........but........it's been awhile.