Quote:
Originally Posted by Steve Gutman
You have all been lucky. I bent mine back (and forth, back and forth) but the shaft is braized into the bracket and the the shaft has pulled out of the hole. I could braze it back but haven't attacked this job. Anyone know how to remove those platic chromed covers on the side of the seat?
|
These chromed covers are a pain in the neck
. Very poorly designed and not meant for removal. Be prepared to be inventive when trying to re-attach, the plastic pins are very brittle and break off easily. I had to use some two faced silicone sticky tape in the end...worked pretty good. Good luck and sorry to hear your bracket broke
, hope someone can suggest what you might do to fix it.