View Single Post
Old 09-01-2001, 01:53 AM
JDUB JDUB is offline
Registered User
Join Date: Apr 2000
Posts: 412
I think I used a 7/8 inch on the upper strut nut. It fit pefectly. I used a 10mm to hold the stut itself on top. The wrench snapped as they were very tight. I had to heat both nuts with Mapp gas to get them off. The ones on the steering knuckle came right out. Be extremely careful with the ABS sensor cables if you have them. They are attached to the struts. The cables are fragile internally. Make sure you support the lower control arm securely while performing this procedure. It is pretty simple. If you haven't purchased struts,but Boge or Bilstiens.
1990 190E 2.6
1996 Grand Voyager 3.3
1985 Mustang GT 5.0 5 SPD
1982 Suzuki GS 750T
Reply With Quote