Quote:
Originally Posted by JMan300sd
i have relativeley new motr mounts (less than a year old) and just put a new air cleaner bracket with new mounts and heat shields, so I guess its safe to assume its the tranny mounts. Is this hard job to do? I have no idea whats involved.
|
Replacing the rear mount is simple. Support the tranny with a big block of wood under the pan. Push up a little, you can go too far, so make sure you have clearance in the tunnel above the driveshaft. You have to remove the tray that holds the mount (4bolts). Should take you 30 minutes or so. Much easier then the other two motor mounts. Mine was actually seperated, the rubber was puffed up like a sponge. Never changed in 22 years. If you need a step by step, I'll be glad to write it up.