I recently purchased a 2000 c280 (m112) Sport with 55k miles on it, to replace my 190e 2.3. After the first start in the morning, on the way to work I get to a stop light about two and a half blocks from home and the car starts to shake and almost wants to die. It might hesitate after the light turns green, but after that, all is well until the next first start of the day.
In my search for information in this forum, I came across the following thread:
ML320 Engine Stumble
It sounds like it might be the problem, but I have a couple questions. One is, would this apply to my car? The other is where do I locate the ECM (engine control module) on this car to check the part number? I don't yet have a service manual.
Also, if my car is affected, is there a link to the full service campaign bulletin? I Googled "Dealer Technical Bulletin 51/00" or even just Mercedes and 51/00 and came up with nothing.
I understand that this should be covered under the emissions warranty. How do I approach a dealer service rep about this issue?
Any and all advice is appreciated.