View Single Post
Old 09-06-2001, 07:19 PM
P.E.Haiges P.E.Haiges is offline
Registered User
Join Date: Jan 2000
Location: PA
Posts: 5,440
I think the clutch master cylinder is bad. There is no way of telling from the outside. Kits are available to rebuild them but you need a cylinder hone to do it properly. The hardest part is getting the master cylinder in and out from under the dash. To do the initial bleed connect a hose from a front wheel caliper bleed screw to the slave cylinder bleed screw and pump fluid into the clutch hydraulic system by pumping the brake pedal. Make sure the reservoir is full when you start. ~~~~~~~~P E H~~~~~~~~
Reply With Quote