View Single Post
Old 09-12-2001, 12:27 AM
Stan Pittman Stan Pittman is offline
Senior Member
Join Date: Apr 2001
Location: Beech Island, S.C.
Posts: 468
It may be true that it's 180 degrees off. You can retime the camshaft if you're careful. First position the crankshaft at 45 degrees before TDC and remove the chain tentioner and the cam sprocket. Rotate the cam 180 degrees to 45 degrees before TDC and then replace the chain and tentioner. Turn the crank to TDC and check the cam timing.
Reply With Quote