View Single Post
  #6  
Old 06-26-2006, 08:54 PM
Roncallo Roncallo is offline
88Black560SL
 
Join Date: Oct 2004
Location: CT
Posts: 3,510
I dident seal them. I thought about it but I remembered how the headlights on my Taurus were leaking and filling up with water, consequently burning out bulbs. All attempts to seal my Taurus lights failed so in the end I just drilled 3 drain holes at the bottom of each light to let water out and never hads a problem since.

For my plates. If I recal mine were a galvinized steel, they were not shiny and I did not make any attempt to clean them any more than wiping them off. I doubt polishing the plates would have made any difference in appearance of the assembly but I could be wrong.

If you can polish only one side and assemble them on the bench loose and see if you can tell the difference and post your findings.

John Roncallo

Last edited by Roncallo; 06-26-2006 at 08:59 PM.
Reply With Quote