View Single Post
  #9  
Old 07-13-2006, 11:44 AM
Brian Carlton Brian Carlton is offline
Banned
 
Join Date: May 2002
Location: Blue Point, NY
Posts: 25,396
Quote:
Originally Posted by autozen
If you are only going to replace one switch, then the coat hangar will work with patience, but if you are doing more than one, Mike is right about the special tool.

On the SD, with one slot, I had very good success with a jeweler's screwdriver. It will slide in and you can get some levering action to easily force the pawl to retract.
Reply With Quote