Ok, then I might have a problem.
I changed the waterpump, which involved removing the harmonic balancer and distributor (and I also changed the belts), and now after putting things back together, the car will not start. The starter turns, but it seems like like there is no spark. I was careful to replace the distributor cap back at the marked point for cylinder 1, and put the balancer back on at top dead center (which is where I took it off from). Any ideas?? Thanks in advance. Any help is appreciated.
2003 S500 Black/Charcoal
1990 560SEL 61k Arctic White/Grey
1988 420SEL Black/Palomino Sold @ 85k
1987 420SEL Midnight Blue/Grey
1986 420SEL Diamond Blue/Grey
1983 380SEL Champagne/Palomino