View Single Post
Old 09-23-2001, 07:00 PM
Posts: n/a
I did like you suggested but after installing the
hoses i found that low side reading was 150 and the high about the same after holding the motor at
2000 rpm for 30 sec the low came down to about 20 high was at 225 fans came on and the high dropped to about 200 i added more freon until it will hold
30 at 2000 rpm high was holding at 210 after going
back to idle it holds at 40 235 then drops to 215 with fans. vent temp are down to like 45 or so. should high and low be the same with the sytem off?
Reply With Quote