Hi,

I used your diagram to help find my vacuum problem (passanger door actuater does not unlock) Thanks, it is great. I have an 84 300D and there was a couple of differences in my system then your diagram showed.

Under the front passenger floor panel where the 2 - 4 way junctions are, my far right holes (both green and red stripe) actuate the gas and trunk lock and the center hole (both green and red stripe) actuates the rear passenger door. I'm sure it doesn't matter which of the holes they use I just pointed out the difference in my syatem.

One mistake I found, is your diagram has the right hole red stripe locking back door, gas and trunk. The back passenger door lock should probably go from the center hole to the door to be consistant with the unlock.

Thanks again for your drawing. It's the easiest diagram to understand I've seen so far.

__________________
Mitch
1984 300D Turbo Diesel 265,000 miles
Previously Owned
1969 280SE 4.5 (what a great car!)
1979 450SL (was fun but a real gas guzzler - bought and sold on eBay)