View Single Post
Old 09-27-2001, 08:28 PM
jsmith's Avatar
jsmith jsmith is offline
Join Date: Aug 2001
Location: At Sea
Posts: 1,729
yup, i replaced the gasket (note 2.8 gasket is not the same as 3.2 ), drain plug seal, torque converter plug seal and filter. that high reading was after a 45 minute drive. i let it sit about an hour then started it. the engine temp was around 85 but just idling, i took a reading again and it was smack in the middle of the 80 degree range! what does that tell you? that under load, transmission fluid expands?

Last edited by jsmith; 09-27-2001 at 11:49 PM.
Reply With Quote