Good points. It depends on his skill level and his ability to pull the left head. From my reading on the subject, I have a W126 300SE, the valves get bent and need to be replaced. Helicoils need to be added to the head bolt holes and a drilling guide used because some of the bolt holes are at a slight angle. All this is detailed in the repair manual.
This work is the reason behind my recommendation of a replacement engine.
Maybe Mr. ericzacha has all the necessary skills and equipment or access to it. He says he is a student with limited funds.
__________________
Regards
Warren
Currently 1965 220Sb, 2002 FORD Crown Vic Police Interceptor
Had 1965 220SEb, 1967 230S, 280SE 4.5, 300SE (W126), 420SEL
ENTER > = (HP RPN)
Not part of the in-crowd since 1952.
|