View Single Post
Old 10-02-2001, 12:01 AM
Posts: n/a
Question Wiring to the Cold Start Valve and other places.

And, while you're at it, can someone describe where the wire to the cold start valve originates on a '76 450 (SE)? I have no obvious cut or broken wires in the vicinity, but a very obvious opening on the two-spade connector on the CS valve with no wire to plug onto it.

Also, green wire, under the distributor, 30 inches long, with round black single female coupling -- where does this go?

Finally, red wire, with fuse and closed loop blade connector. Wire is in ribbed harness tubing, originates near master cylinder, follows cowl all the way to cruise control, then follows right fender all the way to washer reservoir -- where does this go?

Any help appreciated.
Reply With Quote