View Single Post
  #4  
Old 10-03-2001, 12:31 AM
Dirty Ern
Guest
 
Posts: n/a
If it's like the W126 mirror, there is a triangle shaped blank plastic plate on the inside opposite the mirror. Carefully pop it out and remove 2 or 3 small screws, then disconnect the wiring, now the mirror is free and if you look inside there will be a circular spring clip about 2 1/2" in diameter. Get it to release and the glass part will come out.

Ernie

PS.....just an idea, if you have a wrecking yard that lets you go in and retrieve your own parts, it makes for a really good dry run/experimental prooving grounds.
Reply With Quote