View Single Post
Old 08-26-2006, 09:48 PM
engatwork's Avatar
engatwork engatwork is offline
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 13,619
How to you maintain tension on the chain as it comes up and out from the crankshaft?
Brian I looked for a pic of it with the tie wraps but I don't seem to have one of those. I must be too busy to be able to hold the camera. Anyway, both sides (accross the cut) of the chain are tie wrapped to the spkt so the cam spkt is pulling the old chain out. Next time I do one I will take pics of it. You go slow using this procedure but it is accurate.

Jmana you are going to have to try to find your TDC indicator on the crank. If it is lined up and the cam marks are lined up then nothing has moved. Other than tie wrapping the chain to the spkt do this before you do anything else.
Reply With Quote