View Single Post
Old 08-28-2006, 05:30 PM
Jmana Jmana is offline
Registered User
Join Date: Sep 2005
Posts: 598
I've found a way to get the fan off without any expensive tools. I just took an allen wrench and cut about 3/4 of an inch off the end to allow enough clearance between the fan and radiator. Then I took my channel locks to hold the pully in place and put a breaker bar on the allen wrench, got the bolt loose, then took some tie straps and tied the allen wrench to one of the fan blades. Then it's a simple matter of rotating the fan till it comes out. Installation works the same way.
87 300D - Running on Veggie oil; 260,000 plus miles; Original #14 head
Reply With Quote