View Single Post
  #2  
Old 10-13-2001, 08:39 PM
Benzmac Benzmac is offline
Registered User
 
Join Date: Mar 1999
Location: Suwanee, GA, USA
Posts: 4,712
If the gap is too wide, I guess it could get to the point where it would not come on.

I would check the power and ground by fooling the relay by bridging one of the temp sensors.

The easiest way is to bridge the high pressure switch on the drier.
__________________
Benzmac:
Donnie Drummonds
ASE CERTIFIED MASTER AUTO TECHNICIAN
MERCEDES SPECIALIST 11 YRS
Reply With Quote