Thread: Vacuum diagram
View Single Post
Old 10-14-2001, 08:21 PM
Posts: n/a
Originally posted by Benzmac
Make sure you have fuel pressure while turning over the engine and you have spark into the cylinders.
Thank you very much Benzmac,

I'm sorry that I just get back with you today, but I just returned from a trip to Augusta, Ga.
I must have enough fuel pressure, because my sparkplugs are soaked with fuel after I try to start the car.
I have a spark on the plugs, but I have to check on Tuesday if the spark is strong enough to ignite the fuel.
I still like to find a diagram or photograph from a 1980 model 450SL, just to see if my vacuum hoses are hooked up correctly.

Thanks again for your help and good luck with your shop.

Reply With Quote