Quote:
Originally Posted by TMAllison
For priming you want to crank manually for 20-30 secs at a time for 3 tries and then let the starter sit 5 minutes to cool off before trying again.
|
Just a "Heads Up", the Owner's Manual says you can crank up to 40 seconds at a time but doesn't specify a cool-down time
I think I'd wait 5 minutes
at least between
single cranking attempts. If it were mine (as it was when I replaced all the IP o-rings) I'd wait
10.
Just my opinion.
MB is sure "proud" of their starters!