View Single Post
Old 10-18-2001, 12:22 AM
be459 be459 is offline
Registered User
Join Date: Jun 1999
Location: Los Angeles, Calif, USA
Posts: 521
Assuming that you already spray a good penetrating oil for a while, now try to use a sharp chisel seating against the head of the bolt and hammer the chisel in the direction unscrewing the bolt. The trick works for me everytime on big bolts. I have never tried this trick on small bolts. I always use 6-point socket when the bolt is very tight so that I do not round off the head.

Reply With Quote