Quote:
Originally Posted by firemediceric
On the three way connector I have the vac pump source line hooked in. I have the line to the VCV hooked in. The port for the trans. is empty. I disconnected the line coming from the VCV, the lower line coming off of the side. This is where I hooked the vac. guage. I started the car and nothing happened on the guage. It stayed at zero.
|
The port to the trans must have the Mityvac hooked up to it.
The lower line coming off the side is not relevant here. Just leave it connected as usual.
I wish to see the vacuum to the trans at idle in the current configuration.