Quote:
Originally Posted by Ethan
Easy, but you should use a trim puller - a plastic or metal flat piece with a Y shaped cutout - that slides under the plastic button fasteners to pop them off.
Remove the floor carpeting, it just pulls out and remove the button fasteners on the side trim, you could probably just need to pop the top buttons to access the pump area.
|
#
thanks for the advice as above.
i managed to bet behind the liner and did not have to remove it completely.
when i put my hand in to locate the fuel flap central locking actuator i found that is was hanging loose from its holding bracket.
i fitted it back and now the fuel flap cover locks and unlocks via the central locking!
