View Single Post
Old 11-11-2001, 04:39 PM
Posts: n/a
75 450 wont keep running

Hi All
while tuning the car today i set the dwell at 30 deg.
the meter was connected to the coi,when i started the car ,it ran for appx. 1 min the tach. started fluxuating and the car died.
Dwell was @ 30.
It would not start again for about 5 mins.
and then started. Again the tach. fluxuated after abt.1 min and the car died.
This happened 4 times.

Did i cause damage to the coil or the points????
I also noticed that the tach would shift as if i had a bad connection.Fuel pressure is ok and at the proper pressure.
I am totally lost and need some help

Reply With Quote