View Single Post
  #1  
Old 11-14-2001, 06:38 AM
David C Klasse's Avatar
David C Klasse David C Klasse is offline
CheFrac is Back!
 
Join Date: Jan 2001
Location: Mission Hills in the City of San Diego
Posts: 2,355
Swapping Interior Panels in 95 to 96 C-Class

Don't know the name of the panel (the kick panel?)... but it's the panel above the driver's feet, below the cluster. The panel where the OBDII connector is!

It is plastic on my 95 C280... cheap looking, and it protrudes (towards my knees) more than the ones in the 96 and later 202. Does anyone know if these panels are interchangeable? The newer one looks padded, or similar to the dash (material), while the 95 is plastic and cheap looking!

THANKS.

Ok, I was able to find some pix on my harddrive of the two types.

OK the darn pix won't upload right!

Ok, I was able to upload this pic (it's small) of the 95 panel.. you can see that it's plastic and protrudes (curves out) more than the 96 and later models.
Attached Images
File Type: jpg cluster.jpg (10.6 KB, 132 views)
__________________
2006 E350 w/ 155k miles (Daily Driver)

Previous:
1993 300E 3.2L Sedan w/ close to about 300k miles
2003 E500 Brilliant Silver (Had 217k miles when totalled!)
1989 300E with 289,000 miles (had for <1 yr while in HI)
03 CLK 500 cabrio (Mom's)
2006 C230k (Dad's)
1999 S420 (Mom's/Dad's)
2000 C230k Sport sedans
2001 CLK320 Cabrio (Mom's)
1995 C280 My First Mercedes-Benz... (155k miles. EXCEPTIONAL AUTOMOBILE. Was Very hard to let go of!)

Last edited by David C Klasse; 11-14-2001 at 06:46 AM.
Reply With Quote