of course very familiar with mighyvac.
Quote:
Originally Posted by dmorrison
One of the air switches on the top of the valve cover does effect transmission shifting. The other is for the EGR valve.
|
Uh oh then but that is kind of good news and means that I just have to replace those lines and I should be good to go.
Now, what lines go where? I took a pic with my camera phone before I took it apart but the pic is pretty inadequate.
Ive attached a pic from one of my vacuum repair bookmarks. The schematic is for a 123 but it suggests my lines were not plugged into the right holes in the switch on the VC anyway. My lines were plugged into the bottom right two holes as you view from the front instead of top and bottom right.
Is this right?