Well this is the latest pot work on the 420sel, Removed the pot and re set the ohm to 94.7,from the factory setting of 57.2. This made the unit much more sensitive to alignment,The .7 was far more difficult to achieve, Though I did get it to settle at .668 to a swinging up to .701,I stopped it at that point and will test drive it for a few days just to get the real life testing done. Though I must add after several snap test it held at 700 on decel. and on three fast snaps it only fell below 700 once but no stall. will finish this up after I have tested for a couple of days.JNT