|
I am not enough of an expert to contradict the experts here, but in my opinion, when I changed the accumulators in my 124 wagon they did not self bleed fully.
Maybe if you really load up the rear drive around, then unload and so on, it would work, but for me removing the level adjuster and moving the lever myself up and down a few times (lying on the ground engine running) worked well.
I think the adjuster needs to be correctly set, before the system will self bleed. In my case the adjustment was out before I started my job, so when it went back together the system was not cycling properly, hence no bleeding by just driving around.
John
|