View Single Post
Old 11-20-2001, 05:53 PM
mbdoc mbdoc is offline
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
The small amount of adjustment on a C-Class for alignment should not be able to correct for a front end that is pulling.
This adjustment is done with special bolts & "off-set" washers at the lower control arms. THERE is less than 1/2deg of CASTER adjustment available on this car. I would have someone look at the lower control arm bushings, as wear on these bushings will cause problems.
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
Reply With Quote