Thread: euro 300d to 300dt engine shock question/ oil pan swap
View Single Post
  #2  
Old 02-21-2007, 05:13 AM
t walgamuth's Avatar
t walgamuth t walgamuth is offline
dieselarchitect
  
Join Date: Apr 2005
Location: Lafayette Indiana
Posts: 38,632
it shouldn't be too hard to weld on a piece of angle iron to mount the second shock.

no, the pans will not interchange, i don't believe, between the 300 na and the turbo motor. there is not hardly anything that interchanges between the motors if you sit them side by side. maybe the head casting.

the basic body shell is the same though, so have patience and keep switching things over. i hope you have a complete turbo parts car to take bits from.

good luck

tom w
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.
Reply With Quote