View Single Post
Old 12-11-2001, 11:06 PM
savagetom savagetom is offline
Registered User
Join Date: Oct 2001
Location: Vienna, WV
Posts: 121
Oops! I did this just last week. The heat shield comes off easily with 1 hex head screw (10 mm I think). I changed the drag link and both tie rods at the same time but I think you can change the bushings without removing the othe pieces. Just push them out of the way. Be sure to use some syl-glide when reassembling the bushings. I used the old bolt and a couple of box end wrenches to fashion a puller to lever the bushings in.

Good luck.
Tom Savage
Vienna, WV
1984 300D Euro
1995 S320
Reply With Quote