Manny, thanks for the response. I figure that I will replace the 02 sensor on Bank 1 Pos 1 and go from there. The air pump seems to be working as I listend to it run this morning during start up. I'm hoping that the 02 sensor is lazy and needs replacemnt. I'm still curious though about the sequence of reporting. After resetting the codes the car passed all 02 diagnostics as per the OBD scanner. The only 2 areas that took significant time to report was the secondary air section and the catalyst section. After both sections completed their testing the 0410 code was stored as pending. When the CEL came on the codes were in the following sequence.
Code 1 ( Freeze Frame) P0410
Code 2 P0135
Is there any way that a DIY guy can test the Air injection system ?
Thanks
Rob
|